Etc Ion Uživatelský manuál stáhnout pdf (Strana 2)

ETC Setup Guide

Ion® Remote Processor Unit

Ion® Remote Processor Unit Setup Guide Page 2 of 3 Electronic Theatre Controls, Inc.

Step 4: Attach a network ethernet cable to the ethernet port.

Step 5: Connect optional cables as desired including remote trigger, midi, DMX, and phone

remote.

Step 6: When all connections are made, switch the hard power switch on.

Step 7: Press the soft power switch, on the front of the unit, to power up the light server.

Connector Pinouts

Front Panel

Step 1: Press the soft power switch to activate the RPU (check rear panel to ensure power is

connected and hard power switch is on).

Step 2: Backlit indicators identify the operating status (master, backup, client, and so on) of the

unit.

Step 3: USB port is provided for easy show loading to or from a USB storage device.

Step 4: 20 buttons are configurable from the Eos Configuration Utility (ECU). They are set to a

default configuration. The label strips for these buttons are removable and reversible. Any

changes to the button configuration can be written on the opposite side in pencil.

Note:

If the unit does not power up, check the rear panel to insure the hard power switch

is on (-).

Push

Ground

+ 12Vdc

Relay Out, Normally Closed

Relay Out, Normally Open

Relay Out, Common

8 7 6 5 4 3 2 1

15 14 13 12 11 10 9

Pin Use

1 Common (shield)

2Data -

3Data +

4 no connection

5 no connection

Remote Trigger

connector pinout

DMX 512

connector pinout

Removable

Label Strip

Command

Keypad Buttons

Backlit

Indicators

USB

Soft Power

Switch

Master

Server

Offline

Client

Sync

Backup

Blind

Live Tab Escape

Select M901 M902 M903 M904

Stop/Back

Scroll Lock

M905 M906 M907 GoM908

1 2 3

Setup Guide 1
ETC Setup Guide 2

Komentáře k této Příručce

Žádné komentáře

Etc Ion Uživatelský manuál Strana 2

Komentáře k této Příručce

Související produkty a manuály pro Kontrolní panel Etc Ion