Etc Source Four CE Mini Uživatelský manuál stáhnout pdf (Strana 8)

Locking the rotation in the canopy and track-mount variations

Step 1: Rotate the luminaire into the desired position. Luminaire will be

prevented from rotating completely around to protect the wiring.

Step 2: Insert a 1.5mm Allen wrench into the small hole on the yoke lock.

Step 3: Turn wrench to tighten down the yoke lock.

Focusing the beam

Step 1: Loosen the beam

focus knob located

under the barrel. Do

not remove the knob.

Step 2: Slide the lens tube

forward or backward to

achieve the desired

beam edge.

Step 3: Once the luminaire is

focused, tighten the

beam focus knob.

Shaping the Beam

The beam can be shaped using

the four shutters or with a gobo pattern.

The Source Four Mini has four shutters:

left, right, top, and bottom. Each shutter

can be pulled out or pushed in to create

the desired beam shape.

Yoke lock

Beam focus knob

1 2 3 4 5 6 7 8 9 10 11 12

Žádné komentáře

Etc Source Four CE Mini Uživatelský manuál Strana 8